View source for Template:LumiLuxLite Camera Firmware Upgrade

=LumiLuxLite Kit Camera Firmware Upgrade (Via Camera's Web Interface)=

==Description==
This article will cover how to upgrade firmware on the '''N3T-5KA2''' cameras included in the LumiLuxLite Kit, via the camera's web interface

==Prerequisites==
* LumiLuxLite Kit: Luminys NVR, N3T-5KA2 Cameras
* The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR
* A Computer on the Same Network as the NVR
* The Latest Firmware for the LumiLuxLite IP Cameras:
Download Here:
{|
|{{Template:LumiLuxLiteN3}}
|}

'''PLEASE NOTE:''' <!--If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version '''6.2.138.410000''' or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.--> If you are following these instructions to upgrade the camera via the camera's web interface, make sure the camera firmware file you are using ends with ".update". If it ends with ".bin", change it to ".update".
<br>If you want to upgrade the camera's firmware via the the NVR's interface, follow the instructions on this page: [[Kits/LumiLuxLite_Camera_Firmware_Upgrade_Via_NVR|Here]]

==Step by Step Instructions==
1. Log into the web inteface of the NVR.
<br>Click on '''Camera''' at the top.
<br>Click on '''PoE''' on the left.
<br>Click on the '''Bridge''' option for '''Mode''' '''(This is a requirement to use bridge mode to process the update)'''

[[File:LumiLuxLiteCameraFirmwareUpgrade1.png|1200px]]

2. Click on '''OK'''

[[File:LumiLuxLiteCameraFirmwareUpgrade2.png|500px]]

3. Click on '''Apply''' at the bottom

[[File:LumiLuxLiteCameraFirmwareUpgrade3.png|1200px]]

4. Click on '''OK'''

[[File:LumiLuxLiteCameraFirmwareUpgrade4.png|500px]]

5. You will be logged out of the NVR and it will say '''Operation succeeded''' and '''Restarting'''.
<br>The NVR will reboot

[[File:LumiLuxLiteCameraFirmwareUpgrade5.png|1200px]]

6. Once the NVR is done rebooting, log back into the web interface.
<br>Click on '''Camera''' at the top.
<br>Click on '''Camera Registration''' on the left.
<br>Click on '''Protocol''' in the bottom Device Search section to re-order the list by the protocol of each camera

[[File:LumiLuxLiteCameraFirmwareUpgrade6.png|1200px]]

7. Scroll through the Device Search section on the bottom, until you find your cameras listed with the '''LumiKit''' protocol.
<br>Note the IP addresses of each camera

[[File:LumiLuxLiteCameraFirmwareUpgrade7.png|1200px]]

8. Input one of the IP addresses of one of the cameras in your web browser to load the web interface of that camera.
<br>Enter "'''admin'''" in the '''Username''' field.
<br>Enter "'''fghj1234'''" in the '''Password''' field.
<br>Click on '''Login'''

[[File:LumiLuxLiteCameraFirmwareUpgrade8.png|1200px]]

9. Click on '''Setting''' at the top.
<br>Expand '''System''' on the left.
<br>Click on '''System Upgrade'''.
<br>Click on the '''Import''' button

[[File:LumiLuxLiteCameraFirmwareUpgrade9.png|1200px]]

10. Search your file system, then locate and select the LumiLuxLite IP Camera Firmware. '''Make sure the file name ends with ".update".'''
<br>You will see the name of the firmware file next to '''Import Upgrade File''' on the camera's web interface.
<br>Click on '''Upgrade'''

[[File:LumiLuxLiteCameraFirmwareUpgrade10.png|1200px]]

11. While the camera's firmware is upgraded it will display the following message.
<br>When it is done upgrading, the camera will reboot, and you will be logged out of the web interface

[[File:LumiLuxLiteCameraFirmwareUpgrade11.png|1200px]]

12. After the camera reboots, log back into the web interface.
<br>Click on '''Setting''' at the top.
<br>Expand '''Information''' on the left.
<br>Click on '''Version Information'''.
<br>Verify the '''System Version''' matches the new firmware version you just upgraded to

[[File:LumiLuxLiteCameraFirmwareUpgrade12.png|1200px]]

13. Repeat Steps 8 through 12 for each camera.

14. Log back into the web interface of the NVR.
<br>Click on '''Camera''' at the top.
<br>Click on '''PoE''' on the left.
<br>Click on the '''Route''' option for '''Mode'''

[[File:LumiLuxLiteCameraFirmwareUpgrade13.png|1200px]]

15. Click on '''Apply''' at the bottom

[[File:LumiLuxLiteCameraFirmwareUpgrade14.png|1200px]]

16. Click on '''OK'''

[[File:LumiLuxLiteCameraFirmwareUpgrade4.png|500px]]

17. You will be logged out of the NVR and it will say '''Operation succeeded''' and '''Restarting'''.
<br>The NVR will reboot

[[File:LumiLuxLiteCameraFirmwareUpgrade5.png|1200px]]

18. Log back into the web interface of the NVR.
<br>Click on '''Camera''' at the top.
<br>Click on '''Camera Registration''' on the left.
<br>Verify that all of your cameras have re-connected to the NVR and show Green Circles under the '''Connection Status''' column

[[File:LumiLuxLiteCameraFirmwareUpgrade17.png|1200px]]