View source for LumiCloud/iMD Setup for a D2C Camera via LumiCloud Web

= <div class="center">iMD Setup for a Direct to Cloud Camera via LumiCloud Web</div> =

===Description===
This tutorial will go over how to enable intelligent motion detection (iMD) for a Direct to Cloud Camera in LumiCloud.

===Prerequisites===
* LumiCloud account logged in to https://webapp.lumicloud.com
* Direct to Cloud Camera with active license

====Instructions====
1. Log into the LumiCloud User Portal.
<br>Click on the Device Type Selection at the top left, and select '''Video'''

[[File:LumiCloudD2CCameraIMDSetup1.png|1400px]]

2. Click on '''Devices''' on the left.
<br>Then click on '''Settings''' next to the Direct to Cloud camera in the list

[[File:LumiCloudD2CCameraIMDSetup2.png|1400px]]

3. Select '''IMD''' on the left.
<br>Enable the sliders next to '''Enable''', '''IMD Enable''', and '''SnapshotEnable'''.
<br>Then enable the sliders next to either '''Human Detection''', '''Vehicle Detection''', or both, to choose what type of targets will be filtered.
<br>Click the drop-down next to '''Detection Sensitivity''' to choose how sensitive the motion detection is for it to trigger.
<br>Click the drop-down next to '''Detection Schedule''' and choose either '''All Day''' to detect iMD events 24/7, or '''Custom''' to set a specific schedule.
<br>If you selected '''Custom''', drag and highlight on the schedule below to set which times each day that iMD events are detected. (Blue means it will detect them, Grey means it will not.)
<br>Click on '''Save''' at the top right to save your changes

[[File:LumiCloudD2CCameraIMDSetup3.png|1400px]]