IP Speaker/IP Speaker Setup - Revision history

Techsupport at 21:53, 2 October 2025

2025-10-02T21:53:14Z

← Older revision		Revision as of 14:53, 2 October 2025
Line 43:		Line 43:
	[[File:IPSpeakerSetup3.png\|1400px]]		[[File:IPSpeakerSetup3.png\|1400px]]

	5. Select '''Program Management''' on the left.		5. Select '''Interface Protocol''' on the left.
			<br>Select the '''ONVIF''' tab.
			<br>Enter the IP Speaker's admin account password in the '''Password''' field.
			<br>Enter that same password in the '''Confirm Password''' field.
			<br>Click on '''Save'''

			[[File:IPSpeakerSetup16.png\|1400px]]

			6. Select '''Program Management''' on the left.
	<br>You can test play any of the existing audio files through the speaker by pressing the '''Play''' button next to any of them.		<br>You can test play any of the existing audio files through the speaker by pressing the '''Play''' button next to any of them.
	<br>If you want to delete any of the ~~exisisting~~ audio files, press '''Delete''' next to it.		<br>If you want to delete any of the existing audio files, press '''Delete''' next to it.
	<br>To add more audio files, select the '''Upload''' button and select an audio file from your PC's file system.		<br>To add more audio files, select the '''Upload''' button and select an audio file from your PC's file system.
	<br>'''NOTE:''' The speaker can only handle up to 16 audio files		<br>'''NOTE:''' The speaker can only handle up to 16 audio files

Techsupport at 19:21, 1 October 2025

2025-10-01T19:21:24Z

← Older revision		Revision as of 12:21, 1 October 2025
Line 74:		Line 74:
	<br>Then click on '''OK''' on the previous window		<br>Then click on '''OK''' on the previous window

	[[File:IPSpeakerSetup7.png\|~~1000px~~]]		[[File:IPSpeakerSetup7.png\|700px]]

	4. Click on the '''Refresh''' button at the bottom until the indicator under '''Status''' changes to a Green color.		4. Click on the '''Refresh''' button at the bottom until the indicator under '''Status''' changes to a Green color.

Techsupport at 19:20, 1 October 2025

2025-10-01T19:20:48Z

← Older revision		Revision as of 12:20, 1 October 2025
Line 66:		Line 66:
	<br>Enter "admin" in the '''Username''' field.		<br>Enter "admin" in the '''Username''' field.
	<br>Enter the IP Speaker's admin account password in the '''Password''' field.		<br>Enter the IP Speaker's admin account password in the '''Password''' field.
	<br>Click on the '''~~Setting~~''' button		<br>Click on the '''Settings''' button

	[[File:IPSpeakerSetup6.png\|600px]]		[[File:IPSpeakerSetup6.png\|600px]]

Techsupport at 19:18, 1 October 2025

2025-10-01T19:18:48Z

← Older revision		Revision as of 12:18, 1 October 2025
Line 37:		Line 37:
	<br>Enter an IP address in the '''Terminal IP''' field, if you want to change the IP address of the IP Speaker.		<br>Enter an IP address in the '''Terminal IP''' field, if you want to change the IP address of the IP Speaker.
	<br>If you changed the IP address, update the information to match in the '''Gateway''' and '''Subnet Mask''' fields.		<br>If you changed the IP address, update the information to match in the '''Gateway''' and '''Subnet Mask''' fields.
	<br>Alternatively, you can select the '''Enable''' option next to DHCP to have the network's DHCP server automatically assign the IP Speaker ~~and~~ IP Address, ~~etc~~.		<br>Alternatively, you can select the '''Enable''' option next to DHCP to have the network's DHCP server automatically assign the IP Speaker an IP Address, Gateway, and Subnet Mask.
	<br>Adjust the sliders next to '''Recording Volume''' and '''Play Volume''' for the build in microphone and speaker.		<br>Adjust the sliders next to '''Recording Volume''' and '''Play Volume''' for the build in microphone and speaker.
	<br>Click on '''Save'''		<br>Click on '''Save'''

Techsupport at 19:17, 1 October 2025

2025-10-01T19:17:06Z

← Older revision		Revision as of 12:17, 1 October 2025
Line 27:		Line 27:

	3. Enter "admin" in the '''UserName''' field.		3. Enter "admin" in the '''UserName''' field.
	<br>Enter the IP Speaker's new password ~~int he~~ '''Password''' field.		<br>Enter the IP Speaker's new password in the '''Password''' field.
	<br>Click on '''Login'''		<br>Click on '''Login'''

Techsupport at 19:16, 1 October 2025

2025-10-01T19:16:35Z

← Older revision		Revision as of 12:16, 1 October 2025
Line 27:		Line 27:

	3. Enter "admin" in the '''UserName''' field.		3. Enter "admin" in the '''UserName''' field.
	<br>Enter the IP Speaker's new password int he '''~~PassWord~~''' field.		<br>Enter the IP Speaker's new password int he '''Password''' field.
	<br>Click on '''Login'''		<br>Click on '''Login'''

Techsupport: Created page with "=IP Speaker Setup= ==Description== This article will cover how to setup a S-1515A IP Speaker with a Luminys NVR ==Prerequisites== * S-1515A IP Speaker on the same network as a PC * Luminys NVR ==Step by Step Instructions== ===Initial IP Speaker Setup=== 1. Open the web interface of the IP Speaker on a PC on the same network.
The defualt IP Address is 192.168.1.101.
Enter the defualt username of "admin" in the '''UserName''' field.
Enter the defualt passwo..."

2025-10-01T19:14:52Z

Created page with "=IP Speaker Setup= ==Description== This article will cover how to setup a S-1515A IP Speaker with a Luminys NVR ==Prerequisites== * S-1515A IP Speaker on the same network as a PC * Luminys NVR ==Step by Step Instructions== ===Initial IP Speaker Setup=== 1. Open the web interface of the IP Speaker on a PC on the same network. The defualt IP Address is 192.168.1.101. Enter the defualt username of "admin" in the '''UserName''' field. Enter the defualt passwo..."

New page

=IP Speaker Setup=

==Description==
This article will cover how to setup a S-1515A IP Speaker with a Luminys NVR

==Prerequisites==
* S-1515A IP Speaker on the same network as a PC
* Luminys NVR

==Step by Step Instructions==

===Initial IP Speaker Setup===
1. Open the web interface of the IP Speaker on a PC on the same network.
 The defualt IP Address is 192.168.1.101.
 Enter the defualt username of "admin" in the '''UserName''' field.
 Enter the defualt password of "admin" in the '''Password''' field.
 Click on '''Login'''

[[File:IPSpeakerSetup1.png|1400px]]

2. Enter the default password of "admin" in the '''Old Password''' field.
 Enter a new password in the '''New Password''' field.
 Enter the same new password in the '''Confirm Password''' field.
 Click on '''Update'''

[[File:IPSpeakerSetup2.png|1400px]]

3. Enter "admin" in the '''UserName''' field.
 Enter the IP Speaker's new password int he '''PassWord''' field.
 Click on '''Login'''

[[File:IPSpeakerSetup1.png|1400px]]

4. Select '''System Settings''' on the left.
 Change the name of the IP Speaker in the '''Product Name''' field.
 Enter a unique number in the '''Terminal ID''' field. '''NOTE:''' Each IP Speaker used on the same NVR needs a unique Terminal ID Number.
 Enter an IP address in the '''Terminal IP''' field, if you want to change the IP address of the IP Speaker.
 If you changed the IP address, update the information to match in the '''Gateway''' and '''Subnet Mask''' fields.
 Alternatively, you can select the '''Enable''' option next to DHCP to have the network's DHCP server automatically assign the IP Speaker and IP Address, etc.
 Adjust the sliders next to '''Recording Volume''' and '''Play Volume''' for the build in microphone and speaker.
 Click on '''Save'''

[[File:IPSpeakerSetup3.png|1400px]]

5. Select '''Program Management''' on the left.
 You can test play any of the existing audio files through the speaker by pressing the '''Play''' button next to any of them.
 If you want to delete any of the exisisting audio files, press '''Delete''' next to it.
 To add more audio files, select the '''Upload''' button and select an audio file from your PC's file system.
 '''NOTE:''' The speaker can only handle up to 16 audio files

[[File:IPSpeakerSetup4.png|1400px]]

===IP Speaker Configuration on Luminys NVR===

1. Open the web interface of a Luminys NVR.
 Select '''System''' at the top.
 Expand '''Network''' on the left and click on '''IP Speaker''' under that.
 Click on '''Manually Add''' near the top

[[File:IPSpeakerSetup5.png|1400px]]

2. Enter a name for the IP Speaker in the '''Speaker Name''' field.
 Enter the local IP address of the IP Speaker in the '''IP Address''' field.
 Enter the unique terminal ID number for the IP Speaker in the '''Terminal ID''' field.
 Enter "1000" in the '''Onvif Port''' field.
 Enter "admin" in the '''Username''' field.
 Enter the IP Speaker's admin account password in the '''Password''' field.
 Click on the '''Setting''' button

[[File:IPSpeakerSetup6.png|600px]]

3. Click on a camera channel to highlight it and bind the IP Speaker to 2 Way Talk for that channel.
 Click on '''OK'''.
 Then click on '''OK''' on the previous window

[[File:IPSpeakerSetup7.png|1000px]]

4. Click on the '''Refresh''' button at the bottom until the indicator under '''Status''' changes to a Green color.
 If it does not change after 30 seconds to 1 minute, click on the Pencil icon under '''Edit''' and verify the settings you entered are correct

[[File:IPSpeakerSetup8.png|1400px]]

5. Click on '''Live View''' at the top.
 Select the camera on the list, that matches the channel you selected in Step 5 above, to view its live view.
 Click on the IP Speaker icon at the top right of the live view of that camera to enable 2 Way Talk through the IP Speaker.
 Click it again to disable it when you are done with 2 Way Talk

[[File:IPSpeakerSetup9.png|1400px]]

6. Click on the '''Camera''' at the top.
 Then expand '''AI Event''' on the left.
 Then select '''Intelligent Mode''' under that.
 Choose a channel that has VCA from the drop-down next to '''Channel'''.
 Check the box next to '''VCA'''.
 Click on '''Apply''' at the bottom

[[File:IPSpeakerSetup10.png|1400px]]

7. Select '''VCA''' on the left.
 Choose the same channel from the previous step from the drop-down next to '''Channel'''.
 Press the '''+''' plus button to create a new VCA rule.
 Make sure the box is checked next to that new rule.
 Double-click on the part of that new rule under '''Type''' and choose what type of VCA rule this will be.
 Click on '''Draw Rule''' under the live view on the left.
 Left click on the live view to start drawing the rule. Keep left clicking to add more segments. Right click to complete drawing the rule.
 Check the box next to '''IP Speaker''' in the '''Trigger''' section.
 Click on the '''Settings''' button

[[File:IPSpeakerSetup11.png|1400px]]

8. Check the box next to the IP Speaker.
 Click on the Gear icon under '''Media'''

[[File:IPSpeakerSetup12.png|600px]]

9. Select which audio file, you want to play out of the IP Speaker when the VCA rule is triggered, from the drop down list

[[File:IPSpeakerSetup13.png|600px]]

10. Click on '''OK'''.
 Then click on '''OK''' on the previous window

[[File:IPSpeakerSetup14.png|600px]]

11. Click on '''Apply''' at the bottom

[[File:IPSpeakerSetup15.png|1400px]]