Kits/LumiLuxLite Camera Firmware Upgrade - Revision history

Techsupport: Replaced content with "{{Template:LumiLuxLite_Camera_Firmware_Upgrade}}"

2025-09-18T17:38:14Z

Replaced content with "{{Template:LumiLuxLite_Camera_Firmware_Upgrade}}"

← Older revision		Revision as of 10:38, 18 September 2025
Line 1:		Line 1:
	~~=LumiLuxLite Kit Camera Firmware Upgrade=~~		{{Template:LumiLuxLite_Camera_Firmware_Upgrade}}

	~~==Description==~~
	~~This article will cover how to upgrade firmware on the N3T-5KA2 cameras included in the LumiLuxLite Kit~~

	~~==Prerequisites==~~
	* LumiLuxLite Kit: ~~Luminys NVR, N3T-5KA2 Cameras~~
	* The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR
	* A Computer on the Same Network as the NVR
	* The Latest Firmware for the LumiLuxLite IP Cameras ([[Kits_Data_Sheets_%26_Downloads#tabber-Kits \|Download Here]])

	'''PLEASE NOTE:''' If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.

	~~==Step by Step Instructions==~~
	~~1. Log into the web inteface of the NVR.~~
	~~<br>Click on '''Camera''' at the top.~~
	~~<br>Click on '''PoE''' on the left.~~
	~~<br>Click on the '''Bridge''' option for '''Mode''' '''(This is a requirement to use bridge mode to process the update)'''~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade1.png\|1200px]]~~

	~~2. Click on '''OK'''~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade2.png\|500px]]~~

	~~3. Click on '''Apply''' at the bottom~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade3.png\|1200px]]~~

	~~4. Click on '''OK'''~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade4.png\|500px]]~~

	~~5. You will be logged out of the NVR and it will say '''Operation succeeded''' and '''Restarting'''.~~
	~~<br>The NVR will reboot~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade5.png\|1200px]]~~

	~~6. Once the NVR is done rebooting, log back into the web interface.~~
	~~<br>Click on '''Camera''' at the top.~~
	~~<br>Click on '''Camera Registration''' on the left.~~
	~~<br>Click on '''Protocol''' in the bottom Device Search section to re-order the list by the protocol of each camera~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade6.png\|1200px]]~~

	~~7. Scroll through the Device Search section on the bottom, until you find your cameras listed with the '''LumiKit''' protocol.~~
	~~<br>Note the IP addresses of each camera~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade7.png\|1200px]]~~

	~~8. Input one of the IP addresses of one of the cameras in your web browser to load the web interface of that camera.~~
	~~<br>Enter "'''admin'''" in the '''Username''' field.~~
	~~<br>Enter "'''fghj1234'''" in the '''Password''' field.~~
	~~<br>Click on '''Login'''~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade8.png\|1200px]]~~

	~~9. Click on '''Setting''' at the top.~~
	~~<br>Expand '''System''' on the left.~~
	~~<br>Click on '''System Upgrade'''.~~
	~~<br>Click on the '''Import''' button~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade9.png\|1200px]]~~

	~~10. Search your file system, then locate and select the LumiLuxLite IP Camera Firmware.~~
	~~<br>You will see the name of the firmware file next to '''Import Upgrade File''' on the camera's web interface.~~
	~~<br>Click on '''Upgrade'''~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade10.png\|1200px]]~~

	~~11. While the camera's firmware is upgraded it will display the following message.~~
	~~<br>When it is done upgrading, the camera will reboot, and you will be logged out of the web interface~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade11.png\|1200px]]~~

	~~12. After the camera reboots, log back into the web interface.~~
	~~<br>Click on '''Setting''' at the top.~~
	~~<br>Expand '''Information''' on the left.~~
	~~<br>Click on '''Version Information'''.~~
	~~<br>Verify the '''System Version''' matches the new firmware version you just upgraded to~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade12.png\|1200px]]~~

	~~13. Repeat Steps 8 through 12 for each camera.~~

	~~14. Log back into the web interface of the NVR.~~
	~~<br>Click on '''Camera''' at the top.~~
	~~<br>Click on '''PoE''' on the left.~~
	~~<br>Click on the '''Route''' option for '''Mode'''~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade13.png\|1200px]]~~

	~~15. Click on '''Apply''' at the bottom~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade14.png\|1200px]]~~

	~~16. Click on '''OK'''~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade4.png\|500px]]~~

	~~17. You will be logged out of the NVR and it will say '''Operation succeeded''' and '''Restarting'''.~~
	~~<br>The NVR will reboot~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade5.png\|1200px]]~~

	~~18. Log back into the web interface of the NVR.~~
	~~<br>Click on '''Camera''' at the top.~~
	~~<br>Click on '''Camera Registration''' on the left.~~
	~~<br>Verify that all of your cameras have re-connected to the NVR and show Green Circles under the '''Connection Status''' column~~

	~~[[File:LumiLuxLiteCameraFirmwareUpgrade17.png\|1200px]]~~

Techsupport: /* Step by Step Instructions */

2025-09-09T15:09:46Z

Step by Step Instructions

← Older revision		Revision as of 08:09, 9 September 2025
Line 16:		Line 16:
	<br>Click on '''Camera''' at the top.		<br>Click on '''Camera''' at the top.
	<br>Click on '''PoE''' on the left.		<br>Click on '''PoE''' on the left.
	<br>Click on the '''Bridge''' option for '''Mode'''		<br>Click on the '''Bridge''' option for '''Mode''' '''(This is a requirement to use bridge mode to process the update)'''

	[[File:LumiLuxLiteCameraFirmwareUpgrade1.png\|1200px]]		[[File:LumiLuxLiteCameraFirmwareUpgrade1.png\|1200px]]

Techsupport at 22:30, 27 August 2025

2025-08-27T22:30:47Z

← Older revision		Revision as of 15:30, 27 August 2025
Line 2:		Line 2:

	==Description==		==Description==
	This article will cover how to upgrade firmware on the cameras included in the LumiLuxLite Kit		This article will cover how to upgrade firmware on the N3T-5KA2 cameras included in the LumiLuxLite Kit

	==Prerequisites==		==Prerequisites==
	* LumiLuxLite Kit: Luminys NVR, ~~Luminys IP~~ Cameras		* LumiLuxLite Kit: Luminys NVR, N3T-5KA2 Cameras
	* The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR		* The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR
	* A Computer on the Same Network as the NVR		* A Computer on the Same Network as the NVR

Techsupport at 22:24, 27 August 2025

2025-08-27T22:24:38Z

← Older revision		Revision as of 15:24, 27 August 2025
Line 10:		Line 10:
	* The Latest Firmware for the LumiLuxLite IP Cameras ([[Kits_Data_Sheets_%26_Downloads#tabber-Kits \|Download Here]])		* The Latest Firmware for the LumiLuxLite IP Cameras ([[Kits_Data_Sheets_%26_Downloads#tabber-Kits \|Download Here]])

	'''PLEASE NOTE:''' If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit ~~Camera is~~ on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder via the instructions below.		'''PLEASE NOTE:''' If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.

	==Step by Step Instructions==		==Step by Step Instructions==

Techsupport at 22:23, 27 August 2025

2025-08-27T22:23:47Z

← Older revision		Revision as of 15:23, 27 August 2025
Line 9:		Line 9:
	* A Computer on the Same Network as the NVR		* A Computer on the Same Network as the NVR
	* The Latest Firmware for the LumiLuxLite IP Cameras ([[Kits_Data_Sheets_%26_Downloads#tabber-Kits \|Download Here]])		* The Latest Firmware for the LumiLuxLite IP Cameras ([[Kits_Data_Sheets_%26_Downloads#tabber-Kits \|Download Here]])

			'''PLEASE NOTE:''' If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Camera is on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder via the instructions below.

	==Step by Step Instructions==		==Step by Step Instructions==

Techsupport at 18:08, 31 July 2025

2025-07-31T18:08:58Z

← Older revision		Revision as of 11:08, 31 July 2025
Line 48:		Line 48:

	8. Input one of the IP addresses of one of the cameras in your web browser to load the web interface of that camera.		8. Input one of the IP addresses of one of the cameras in your web browser to load the web interface of that camera.
	<br>Enter "admin" in the '''Username''' field.		<br>Enter "'''admin'''" in the '''Username''' field.
	<br>Enter "fghj1234" in the '''Password''' field.		<br>Enter "'''fghj1234'''" in the '''Password''' field.
	<br>Click on '''Login'''		<br>Click on '''Login'''

Techsupport at 18:07, 31 July 2025

2025-07-31T18:07:37Z

← Older revision		Revision as of 11:07, 31 July 2025
Line 38:		Line 38:
	<br>Click on '''Camera''' at the top.		<br>Click on '''Camera''' at the top.
	<br>Click on '''Camera Registration''' on the left.		<br>Click on '''Camera Registration''' on the left.
	<br>Click on '''Protocol''' in the bottom Device Search section to order the list by the protocol of each camera		<br>Click on '''Protocol''' in the bottom Device Search section to re-order the list by the protocol of each camera

	[[File:LumiLuxLiteCameraFirmwareUpgrade6.png\|1200px]]		[[File:LumiLuxLiteCameraFirmwareUpgrade6.png\|1200px]]

Techsupport at 18:05, 31 July 2025

2025-07-31T18:05:50Z

← Older revision		Revision as of 11:05, 31 July 2025
Line 8:		Line 8:
	* The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR		* The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR
	* A Computer on the Same Network as the NVR		* A Computer on the Same Network as the NVR
	* The Latest Firmware for the LumiLuxLite IP Cameras ([[Kits_Data_Sheets_%26_Downloads#tabber-Kits \| Download Here]])		* The Latest Firmware for the LumiLuxLite IP Cameras ([[Kits_Data_Sheets_%26_Downloads#tabber-Kits \|Download Here]])

	==Step by Step Instructions==		==Step by Step Instructions==

Techsupport at 18:05, 31 July 2025

2025-07-31T18:05:42Z

← Older revision		Revision as of 11:05, 31 July 2025
Line 2:		Line 2:

	==Description==		==Description==
	This article will cover how to upgrade firmware on the cameras included in the LumiLuxLite ~~Kits~~		This article will cover how to upgrade firmware on the cameras included in the LumiLuxLite Kit

	==Prerequisites==		==Prerequisites==
Line 8:		Line 8:
	* The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR		* The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR
	* A Computer on the Same Network as the NVR		* A Computer on the Same Network as the NVR
	* The Latest Firmware for the LumiLuxLite IP Cameras ([[Kits_Data_Sheets_%26_Downloads#tabber-Kits Download Here]])		* The Latest Firmware for the LumiLuxLite IP Cameras ([[Kits_Data_Sheets_%26_Downloads#tabber-Kits \| Download Here]])

	==Step by Step Instructions==		==Step by Step Instructions==

Techsupport: Created page with "=LumiLuxLite Kit Camera Firmware Upgrade= ==Description== This article will cover how to upgrade firmware on the cameras included in the LumiLuxLite Kits ==Prerequisites== * LumiLuxLite Kit: Luminys NVR, Luminys IP Cameras * The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR * A Computer on the Same Network as the NVR * The Latest Firmware for the LumiLuxLite IP Cameras (Kits_Data_Sheets_%26_Downloads#tabber-Kits Download Here) ==Step by Ste..."

2025-07-31T17:59:33Z

Created page with "=LumiLuxLite Kit Camera Firmware Upgrade= ==Description== This article will cover how to upgrade firmware on the cameras included in the LumiLuxLite Kits ==Prerequisites== * LumiLuxLite Kit: Luminys NVR, Luminys IP Cameras * The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR * A Computer on the Same Network as the NVR * The Latest Firmware for the LumiLuxLite IP Cameras (Kits_Data_Sheets_&_Downloads#tabber-Kits Download Here) ==Step by Ste..."

New page

=LumiLuxLite Kit Camera Firmware Upgrade=

==Description==
This article will cover how to upgrade firmware on the cameras included in the LumiLuxLite Kits

==Prerequisites==
* LumiLuxLite Kit: Luminys NVR, Luminys IP Cameras
* The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR
* A Computer on the Same Network as the NVR
* The Latest Firmware for the LumiLuxLite IP Cameras ([[Kits_Data_Sheets_%26_Downloads#tabber-Kits Download Here]])

==Step by Step Instructions==
1. Log into the web inteface of the NVR.
 Click on '''Camera''' at the top.
 Click on '''PoE''' on the left.
 Click on the '''Bridge''' option for '''Mode'''

[[File:LumiLuxLiteCameraFirmwareUpgrade1.png|1200px]]

2. Click on '''OK'''

[[File:LumiLuxLiteCameraFirmwareUpgrade2.png|500px]]

3. Click on '''Apply''' at the bottom

[[File:LumiLuxLiteCameraFirmwareUpgrade3.png|1200px]]

4. Click on '''OK'''

[[File:LumiLuxLiteCameraFirmwareUpgrade4.png|500px]]

5. You will be logged out of the NVR and it will say '''Operation succeeded''' and '''Restarting'''.
 The NVR will reboot

[[File:LumiLuxLiteCameraFirmwareUpgrade5.png|1200px]]

6. Once the NVR is done rebooting, log back into the web interface.
 Click on '''Camera''' at the top.
 Click on '''Camera Registration''' on the left.
 Click on '''Protocol''' in the bottom Device Search section to order the list by the protocol of each camera

[[File:LumiLuxLiteCameraFirmwareUpgrade6.png|1200px]]

7. Scroll through the Device Search section on the bottom, until you find your cameras listed with the '''LumiKit''' protocol.
 Note the IP addresses of each camera

[[File:LumiLuxLiteCameraFirmwareUpgrade7.png|1200px]]

8. Input one of the IP addresses of one of the cameras in your web browser to load the web interface of that camera.
 Enter "admin" in the '''Username''' field.
 Enter "fghj1234" in the '''Password''' field.
 Click on '''Login'''

[[File:LumiLuxLiteCameraFirmwareUpgrade8.png|1200px]]

9. Click on '''Setting''' at the top.
 Expand '''System''' on the left.
 Click on '''System Upgrade'''.
 Click on the '''Import''' button

[[File:LumiLuxLiteCameraFirmwareUpgrade9.png|1200px]]

10. Search your file system, then locate and select the LumiLuxLite IP Camera Firmware.
 You will see the name of the firmware file next to '''Import Upgrade File''' on the camera's web interface.
 Click on '''Upgrade'''

[[File:LumiLuxLiteCameraFirmwareUpgrade10.png|1200px]]

11. While the camera's firmware is upgraded it will display the following message.
 When it is done upgrading, the camera will reboot, and you will be logged out of the web interface

[[File:LumiLuxLiteCameraFirmwareUpgrade11.png|1200px]]

12. After the camera reboots, log back into the web interface.
 Click on '''Setting''' at the top.
 Expand '''Information''' on the left.
 Click on '''Version Information'''.
 Verify the '''System Version''' matches the new firmware version you just upgraded to

[[File:LumiLuxLiteCameraFirmwareUpgrade12.png|1200px]]

13. Repeat Steps 8 through 12 for each camera.

14. Log back into the web interface of the NVR.
 Click on '''Camera''' at the top.
 Click on '''PoE''' on the left.
 Click on the '''Route''' option for '''Mode'''

[[File:LumiLuxLiteCameraFirmwareUpgrade13.png|1200px]]

15. Click on '''Apply''' at the bottom

[[File:LumiLuxLiteCameraFirmwareUpgrade14.png|1200px]]

16. Click on '''OK'''

[[File:LumiLuxLiteCameraFirmwareUpgrade4.png|500px]]

17. You will be logged out of the NVR and it will say '''Operation succeeded''' and '''Restarting'''.
 The NVR will reboot

[[File:LumiLuxLiteCameraFirmwareUpgrade5.png|1200px]]

18. Log back into the web interface of the NVR.
 Click on '''Camera''' at the top.
 Click on '''Camera Registration''' on the left.
 Verify that all of your cameras have re-connected to the NVR and show Green Circles under the '''Connection Status''' column

[[File:LumiLuxLiteCameraFirmwareUpgrade17.png|1200px]]