LumiCenter/How to Configure Video Encoder Devices - Revision history

Techsupport at 19:47, 11 December 2024

2024-12-11T19:47:36Z

← Older revision		Revision as of 12:47, 11 December 2024
Line 19:		Line 19:
	3. Video stream operation panel - In this section you can manage the video streams including adding OSD text as well as privacy masking.		3. Video stream operation panel - In this section you can manage the video streams including adding OSD text as well as privacy masking.

	=Device Object and Child Objects=		==Device Object and Child Objects==
	[[File:Config Encoder 2.jpg]]		[[File:Config Encoder 2.jpg]]

Line 31:		Line 31:


	=Device Parameters=		==Device Parameters==
	[[File:Config Encoder 3.jpg]]		[[File:Config Encoder 3.jpg]]

Techsupport: /* Devices */

2024-12-11T19:47:19Z

Devices

← Older revision		Revision as of 12:47, 11 December 2024
Line 12:		Line 12:
	<youtube>https://www.youtube.com/watch?v=eQSWtPt3uTM</youtube>		<youtube>https://www.youtube.com/watch?v=eQSWtPt3uTM</youtube>

	=Devices=		==Devices==
	[[File:Config Encoder 1.jpg]]		[[File:Config Encoder 1.jpg]]

Techsupport: /* Send Settings To Device */

2024-12-06T21:12:30Z

Send Settings To Device

← Older revision		Revision as of 14:12, 6 December 2024
Line 35:		Line 35:

	====Send Settings To Device====		====Send Settings To Device====
	If you check the box, then the settings on LumiCenter will be synced to the device. (You don’t see it in this screenshot as this camera does not support the function)		If you check the box, then the settings on LumiCenter will be synced to the device. This is something we actually do not recommend, using the device configuration by itself is always the recommended method. (You don’t see it in this screenshot as this camera does not support the function)

	====Object Identification====		====Object Identification====

Techsupport: /* Devices */

2024-12-06T19:06:40Z

Devices

← Older revision		Revision as of 12:06, 6 December 2024
Line 15:		Line 15:
	[[File:Config Encoder 1.jpg]]		[[File:Config Encoder 1.jpg]]

	1. Device Object Tree - ~~This~~ section lists all of the devices that have been added, along with their child objects<br />		1. Device Object Tree - In this section lists all of the devices that have been added, along with their child objects<br />
	2. Device parameters - In this section you can modify the device parameters <br />		2. Device parameters - In this section you can modify the device parameters <br />
	3. Video stream operation panel - In this section you can manage the video streams including adding OSD text as well as privacy masking.		3. Video stream operation panel - In this section you can manage the video streams including adding OSD text as well as privacy masking.

Techsupport: /* Devices */

2024-12-06T19:06:27Z

Devices

← Older revision		Revision as of 12:06, 6 December 2024
Line 15:		Line 15:
	[[File:Config Encoder 1.jpg]]		[[File:Config Encoder 1.jpg]]

	1. Device Object Tree<br />		1. Device Object Tree - This section lists all of the devices that have been added, along with their child objects<br />
	2. Device parameters<br />		2. Device parameters - In this section you can modify the device parameters <br />
	3. Video stream operation panel		3. Video stream operation panel - In this section you can manage the video streams including adding OSD text as well as privacy masking.

	=Device Object and Child Objects=		=Device Object and Child Objects=

Techsupport at 18:55, 6 December 2024

2024-12-06T18:55:18Z

← Older revision		Revision as of 11:55, 6 December 2024
Line 30:		Line 30:
	*Note: LumiCenter only displays the supported feature of the device. Certain features may not be displayed if not supported.		*Note: LumiCenter only displays the supported feature of the device. Certain features may not be displayed if not supported.

	~~====Send Settings To Device====~~
	~~If you check the box, then the settings on LumiCenter will be synced to the device. (You don’t see it in this screenshot as this camera does not support the function)~~

	=Device Parameters=		=Device Parameters=
	[[File:Config Encoder 3.jpg]]		[[File:Config Encoder 3.jpg]]

			====Send Settings To Device====
			If you check the box, then the settings on LumiCenter will be synced to the device. (You don’t see it in this screenshot as this camera does not support the function)

	====Object Identification====		====Object Identification====

Techsupport: /* Device Object and Child Objects */

2024-12-06T17:53:41Z

Device Object and Child Objects

← Older revision		Revision as of 10:53, 6 December 2024
Line 19:		Line 19:
	3. Video stream operation panel		3. Video stream operation panel

	~~===~~=Device Object and Child Objects~~===~~=		=Device Object and Child Objects=
	[[File:Config Encoder 2.jpg]]		[[File:Config Encoder 2.jpg]]

Techsupport: /* Devices */

2024-12-06T17:53:28Z

Devices

← Older revision		Revision as of 10:53, 6 December 2024
Line 12:		Line 12:
	<youtube>https://www.youtube.com/watch?v=eQSWtPt3uTM</youtube>		<youtube>https://www.youtube.com/watch?v=eQSWtPt3uTM</youtube>

	==Devices==		=Devices=
	[[File:Config Encoder 1.jpg]]		[[File:Config Encoder 1.jpg]]

Techsupport: /* Device Parameters */

2024-12-06T17:53:20Z

Device Parameters

← Older revision		Revision as of 10:53, 6 December 2024
Line 33:		Line 33:
	If you check the box, then the settings on LumiCenter will be synced to the device. (You don’t see it in this screenshot as this camera does not support the function)		If you check the box, then the settings on LumiCenter will be synced to the device. (You don’t see it in this screenshot as this camera does not support the function)

	==Device Parameters==		=Device Parameters=
	[[File:Config Encoder 3.jpg]]		[[File:Config Encoder 3.jpg]]

Techsupport at 17:52, 6 December 2024

2024-12-06T17:52:58Z

← Older revision		Revision as of 10:52, 6 December 2024
Line 19:		Line 19:
	3. Video stream operation panel		3. Video stream operation panel

	===Device Object and Child Objects===		====Device Object and Child Objects====
	[[File:Config Encoder 2.jpg]]		[[File:Config Encoder 2.jpg]]

Line 30:		Line 30:
	*Note: LumiCenter only displays the supported feature of the device. Certain features may not be displayed if not supported.		*Note: LumiCenter only displays the supported feature of the device. Certain features may not be displayed if not supported.

	===Send Settings To Device===		====Send Settings To Device====
	If you check the box, then the settings on LumiCenter will be synced to the device. (You don’t see it in this screenshot as this camera does not support the function)		If you check the box, then the settings on LumiCenter will be synced to the device. (You don’t see it in this screenshot as this camera does not support the function)

Line 36:		Line 36:
	[[File:Config Encoder 3.jpg]]		[[File:Config Encoder 3.jpg]]

	===Object Identification===		====Object Identification====
	Enable: you can enable or disable the device. If the device is disabled, it will not occupy the license usage.		Enable: you can enable or disable the device. If the device is disabled, it will not occupy the license usage.
	From here you can also change the Short name and Name of the device. The Device ID cannot be changed.		From here you can also change the Short name and Name of the device. The Device ID cannot be changed.

	===Geolocation===		====Geolocation====
	You can specify the coordinates (latitude, longitude and azimuth) of the device.		You can specify the coordinates (latitude, longitude and azimuth) of the device.

	===Object Features===		====Object Features====
	Use device settings: if you want to use the camera settings without overwriting them with the settings on Lumicenter, select yes. (This feature is not supported on this camera, so you do not see it in the screenshot). This is the reverse parameter of the Send settings to device checkbox. If you enable one option, the other will be disabled.		Use device settings: if you want to use the camera settings without overwriting them with the settings on Lumicenter, select yes. (This feature is not supported on this camera, so you do not see it in the screenshot). This is the reverse parameter of the Send settings to device checkbox. If you enable one option, the other will be disabled.

	===Change the IP Address, Port, Manufacturer, Model of the device===		====Change the IP Address, Port, Manufacturer, Model of the device====
	Break unused connections: if you want to interrupt the video stream from the camera to the VMS whenever it is not needed, select yes. The following conditions must be met for the video stream transmission to be interrupted: i. the video stream is not being displayed on the Lumicenter Client; ii. The stream is not being recorded to any storage; iii. The stream is not being processed by any detection tool.		Break unused connections: if you want to interrupt the video stream from the camera to the VMS whenever it is not needed, select yes. The following conditions must be met for the video stream transmission to be interrupted: i. the video stream is not being displayed on the Lumicenter Client; ii. The stream is not being recorded to any storage; iii. The stream is not being processed by any detection tool.

	===Authentication===		====Authentication====
	You can set the username and password to connect to the device.		You can set the username and password to connect to the device.

	===Video Buffering===		====Video Buffering====
	Accumulate the data received from the device to the buffer and then transfer the data for processing from the buffer. The buffer can improve the smoothness of live view and detection, if the network between the device and the VMS is not good. Between 50 and 1000 milliseconds.		Accumulate the data received from the device to the buffer and then transfer the data for processing from the buffer. The buffer can improve the smoothness of live view and detection, if the network between the device and the VMS is not good. Between 50 and 1000 milliseconds.

	===Panomorph===		====Panomorph====
	You can configure fisheye function related parameters from here.		You can configure fisheye function related parameters from here.

	===Other===		====Other====
	If the device is connected via RTSP, or this is a virtual camera, you can configure its parameters from here.		If the device is connected via RTSP, or this is a virtual camera, you can configure its parameters from here.

	===Alternative view===		====Alternative view====
	Select any camera in the domain to replace this camera in live view when it is not connected.		Select any camera in the domain to replace this camera in live view when it is not connected.