Template:LumiLuxLite Camera Firmware Upgrade Via NVR - Revision history

Techsupport at 19:08, 5 January 2026

2026-01-05T19:08:48Z

← Older revision		Revision as of 12:08, 5 January 2026
Line 18:		Line 18:
	'''PLEASE NOTE:''' <!--If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.--> If you are following these instructions to upgrade the camera via the NVR's web interface, make sure the camera firmware file you are using ends with ".bin". If it ends with ".update", change it to ".bin".		'''PLEASE NOTE:''' <!--If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.--> If you are following these instructions to upgrade the camera via the NVR's web interface, make sure the camera firmware file you are using ends with ".bin". If it ends with ".update", change it to ".bin".
	<br>If you want to upgrade the camera's firmware via the the camera's interface, follow the instructions on this page: [[Kits/LumiLuxLite_Camera_Firmware_Upgrade\|Here]]		<br>If you want to upgrade the camera's firmware via the the camera's interface, follow the instructions on this page: [[Kits/LumiLuxLite_Camera_Firmware_Upgrade\|Here]]

			==Video Instructions==
			<youtube>https://www.youtube.com/watch?v=71VUPJFCh7c</youtube>

	==Step by Step Instructions==		==Step by Step Instructions==

Techsupport at 18:32, 16 December 2025

2025-12-16T18:32:03Z

← Older revision		Revision as of 11:32, 16 December 2025
Line 1:		Line 1:
	=LumiLuxLite Kit Camera Firmware Upgrade (Via NVR's Web Interface)=		=LumiLuxLite Kit Camera Firmware Upgrade (Via NVR's Web Interface)=

	'''PLEASE NOTE:''' These instructions cannot be performed on a LumiLuxLite camera unless it is ~~already~~ on Firmware Version '''6.2.142.410000''' or later		'''PLEASE NOTE:''' These instructions cannot be performed on a LumiLuxLite camera unless it is on Firmware Version '''6.2.142.410000''' or later

	==Description==		==Description==

Techsupport at 19:29, 24 November 2025

2025-11-24T19:29:53Z

← Older revision		Revision as of 12:29, 24 November 2025
Line 1:		Line 1:
	=LumiLuxLite Kit Camera Firmware Upgrade (Via NVR's Web Interface)=		=LumiLuxLite Kit Camera Firmware Upgrade (Via NVR's Web Interface)=

	'''PLEASE NOTE:''' These instructions cannot be performed on a LumiLuxLite camera unless it is already on Firmware Version 6.2.142.410000 or later		'''PLEASE NOTE:''' These instructions cannot be performed on a LumiLuxLite camera unless it is already on Firmware Version '''6.2.142.410000''' or later

	==Description==		==Description==
	This article will cover how to upgrade firmware on the N3T-5KA2 cameras included in the LumiLuxLite Kit, via the NVR's web interface		This article will cover how to upgrade firmware on the '''N3T-5KA2''' cameras included in the LumiLuxLite Kit, via the NVR's web interface

	==Prerequisites==		==Prerequisites==

Techsupport at 00:00, 22 November 2025

2025-11-22T00:00:02Z

← Older revision		Revision as of 17:00, 21 November 2025
Line 1:		Line 1:
	=LumiLuxLite Kit Camera Firmware Upgrade (Via NVR's Web Interface)=		=LumiLuxLite Kit Camera Firmware Upgrade (Via NVR's Web Interface)=

			'''PLEASE NOTE:''' These instructions cannot be performed on a LumiLuxLite camera unless it is already on Firmware Version 6.2.142.410000 or later

	==Description==		==Description==

Techsupport at 00:12, 20 November 2025

2025-11-20T00:12:59Z

Techsupport at 23:37, 19 November 2025

2025-11-19T23:37:12Z

Show changes

Techsupport at 22:42, 19 November 2025

2025-11-19T22:42:11Z

← Older revision		Revision as of 15:42, 19 November 2025
Line 15:		Line 15:

	'''PLEASE NOTE:''' <!--If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.--> If you are following these instructions to upgrade the camera via the NVR's web interface, make sure the camera firmware file you are using ends with ".bin". If it ends with ".update", change it to ".bin".		'''PLEASE NOTE:''' <!--If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.--> If you are following these instructions to upgrade the camera via the NVR's web interface, make sure the camera firmware file you are using ends with ".bin". If it ends with ".update", change it to ".bin".
	<br>If you want to upgrade the camera's firmware via the the camera's interface, follow the instructions on this page:[[Kits/LumiLuxLite_Camera_Firmware_Upgrade\|Here]]		<br>If you want to upgrade the camera's firmware via the the camera's interface, follow the instructions on this page: [[Kits/LumiLuxLite_Camera_Firmware_Upgrade\|Here]]

	==Step by Step Instructions==		==Step by Step Instructions==

Techsupport at 22:42, 19 November 2025

2025-11-19T22:42:04Z

← Older revision		Revision as of 15:42, 19 November 2025
Line 14:		Line 14:
	\|}		\|}

	'''PLEASE NOTE:''' <!--If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.--> If you are following these instructions to upgrade the camera via the ~~camera~~'s web interface, make sure the camera firmware file you are using ends with ".~~update~~". If it ends with ".~~bin~~", change it to ".~~update~~".		'''PLEASE NOTE:''' <!--If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.--> If you are following these instructions to upgrade the camera via the NVR's web interface, make sure the camera firmware file you are using ends with ".bin". If it ends with ".update", change it to ".bin".
	<br>If you want to upgrade the camera's firmware via the the ~~NVR~~'s interface, follow the instructions on this page:[[Here]]		<br>If you want to upgrade the camera's firmware via the the camera's interface, follow the instructions on this page:[[Kits/LumiLuxLite_Camera_Firmware_Upgrade\|Here]]

	==Step by Step Instructions==		==Step by Step Instructions==

Techsupport at 22:40, 19 November 2025

2025-11-19T22:40:43Z

← Older revision		Revision as of 15:40, 19 November 2025
Line 1:		Line 1:
	=LumiLuxLite Kit Camera Firmware Upgrade (Via ~~Camera~~'s Web Interface)=		=LumiLuxLite Kit Camera Firmware Upgrade (Via NVR's Web Interface)=

	==Description==		==Description==
	This article will cover how to upgrade firmware on the N3T-5KA2 cameras included in the LumiLuxLite Kit, via the ~~camera~~'s web interface		This article will cover how to upgrade firmware on the N3T-5KA2 cameras included in the LumiLuxLite Kit, via the NVR's web interface

	==Prerequisites==		==Prerequisites==
Line 11:		Line 11:
	Download Here:		Download Here:
	{\|		{\|
	\|{{Template:~~LumiLuxLiteN3~~}}		\|{{Template:LumiLuxLiteN3_BIN}}
	\|}		\|}

Techsupport: Created page with "=LumiLuxLite Kit Camera Firmware Upgrade (Via Camera's Web Interface)= ==Description== This article will cover how to upgrade firmware on the N3T-5KA2 cameras included in the LumiLuxLite Kit, via the camera's web interface ==Prerequisites== * LumiLuxLite Kit: Luminys NVR, N3T-5KA2 Cameras * The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR * A Computer on the Same Network as the NVR * The Latest Firmware for the LumiLuxLite IP Cameras: Download..."

2025-11-19T22:36:36Z

Created page with "=LumiLuxLite Kit Camera Firmware Upgrade (Via Camera's Web Interface)= ==Description== This article will cover how to upgrade firmware on the N3T-5KA2 cameras included in the LumiLuxLite Kit, via the camera's web interface ==Prerequisites== * LumiLuxLite Kit: Luminys NVR, N3T-5KA2 Cameras * The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR * A Computer on the Same Network as the NVR * The Latest Firmware for the LumiLuxLite IP Cameras: Download..."

New page

=LumiLuxLite Kit Camera Firmware Upgrade (Via Camera's Web Interface)=

==Description==
This article will cover how to upgrade firmware on the N3T-5KA2 cameras included in the LumiLuxLite Kit, via the camera's web interface

==Prerequisites==
* LumiLuxLite Kit: Luminys NVR, N3T-5KA2 Cameras
* The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR
* A Computer on the Same Network as the NVR
* The Latest Firmware for the LumiLuxLite IP Cameras:
Download Here:
{|
|{{Template:LumiLuxLiteN3}}
|}

'''PLEASE NOTE:'''  If you are following these instructions to upgrade the camera via the camera's web interface, make sure the camera firmware file you are using ends with ".update". If it ends with ".bin", change it to ".update".
 If you want to upgrade the camera's firmware via the the NVR's interface, follow the instructions on this page:[[Here]]

==Step by Step Instructions==
1. Log into the web inteface of the NVR.
 Click on '''Camera''' at the top.
 Click on '''PoE''' on the left.
 Click on the '''Bridge''' option for '''Mode''' '''(This is a requirement to use bridge mode to process the update)'''

[[File:LumiLuxLiteCameraFirmwareUpgrade1.png|1200px]]

2. Click on '''OK'''

[[File:LumiLuxLiteCameraFirmwareUpgrade2.png|500px]]

3. Click on '''Apply''' at the bottom

[[File:LumiLuxLiteCameraFirmwareUpgrade3.png|1200px]]

4. Click on '''OK'''

[[File:LumiLuxLiteCameraFirmwareUpgrade4.png|500px]]

5. You will be logged out of the NVR and it will say '''Operation succeeded''' and '''Restarting'''.
 The NVR will reboot

[[File:LumiLuxLiteCameraFirmwareUpgrade5.png|1200px]]

6. Once the NVR is done rebooting, log back into the web interface.
 Click on '''Camera''' at the top.
 Click on '''Camera Registration''' on the left.
 Click on '''Protocol''' in the bottom Device Search section to re-order the list by the protocol of each camera

[[File:LumiLuxLiteCameraFirmwareUpgrade6.png|1200px]]

7. Scroll through the Device Search section on the bottom, until you find your cameras listed with the '''LumiKit''' protocol.
 Note the IP addresses of each camera

[[File:LumiLuxLiteCameraFirmwareUpgrade7.png|1200px]]

8. Input one of the IP addresses of one of the cameras in your web browser to load the web interface of that camera.
 Enter "'''admin'''" in the '''Username''' field.
 Enter "'''fghj1234'''" in the '''Password''' field.
 Click on '''Login'''

[[File:LumiLuxLiteCameraFirmwareUpgrade8.png|1200px]]

9. Click on '''Setting''' at the top.
 Expand '''System''' on the left.
 Click on '''System Upgrade'''.
 Click on the '''Import''' button

[[File:LumiLuxLiteCameraFirmwareUpgrade9.png|1200px]]

10. Search your file system, then locate and select the LumiLuxLite IP Camera Firmware. '''Make sure the file name ends with ".update".'''
 You will see the name of the firmware file next to '''Import Upgrade File''' on the camera's web interface.
 Click on '''Upgrade'''

[[File:LumiLuxLiteCameraFirmwareUpgrade10.png|1200px]]

11. While the camera's firmware is upgraded it will display the following message.
 When it is done upgrading, the camera will reboot, and you will be logged out of the web interface

[[File:LumiLuxLiteCameraFirmwareUpgrade11.png|1200px]]

12. After the camera reboots, log back into the web interface.
 Click on '''Setting''' at the top.
 Expand '''Information''' on the left.
 Click on '''Version Information'''.
 Verify the '''System Version''' matches the new firmware version you just upgraded to

[[File:LumiLuxLiteCameraFirmwareUpgrade12.png|1200px]]

13. Repeat Steps 8 through 12 for each camera.

14. Log back into the web interface of the NVR.
 Click on '''Camera''' at the top.
 Click on '''PoE''' on the left.
 Click on the '''Route''' option for '''Mode'''

[[File:LumiLuxLiteCameraFirmwareUpgrade13.png|1200px]]

15. Click on '''Apply''' at the bottom

[[File:LumiLuxLiteCameraFirmwareUpgrade14.png|1200px]]

16. Click on '''OK'''

[[File:LumiLuxLiteCameraFirmwareUpgrade4.png|500px]]

17. You will be logged out of the NVR and it will say '''Operation succeeded''' and '''Restarting'''.
 The NVR will reboot

[[File:LumiLuxLiteCameraFirmwareUpgrade5.png|1200px]]

18. Log back into the web interface of the NVR.
 Click on '''Camera''' at the top.
 Click on '''Camera Registration''' on the left.
 Verify that all of your cameras have re-connected to the NVR and show Green Circles under the '''Connection Status''' column

[[File:LumiLuxLiteCameraFirmwareUpgrade17.png|1200px]]

← Older revision		Revision as of 17:12, 19 November 2025
Line 21:		Line 21:
	<br>Click on '''Storage''' at the top.		<br>Click on '''Storage''' at the top.
	<br>Click on '''Recording Mode''' on the left.		<br>Click on '''Recording Mode''' on the left.
	<br>Check the boxes for '''~~Disbable~~''' under '''Main Stream''', '''Sub Stream1''', and '''Sub Stream2'''.		<br>Check the boxes for '''Disable''' under '''Main Stream''', '''Sub Stream1''', and '''Sub Stream2'''.
	<br>Click on '''Apply''' at the bottom		<br>Click on '''Apply''' at the bottom

Line 44:		Line 44:

	5. As each camera upgrades you will see the '''Status''' change from "Not Upgraded" to "Downloading".		5. As each camera upgrades you will see the '''Status''' change from "Not Upgraded" to "Downloading".
	<br>Then '''Status''' will change to a percentage that slowly increases		<br>Then the '''Status''' will change to a percentage that slowly increases

	[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR5.png\|1200px]]		[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR5.png\|1200px]]
Line 54:		Line 54:
	7. After each camera has successfully upgraded to the latest firmware, they will reboot.		7. After each camera has successfully upgraded to the latest firmware, they will reboot.
	<br>Once the cameras are all done rebooting, click on '''Refresh''' at the bottom.		<br>Once the cameras are all done rebooting, click on '''Refresh''' at the bottom.
	<br>Verify ~~that~~ for each camera that was upgraded, that it shows the correct latest version under '''Firmware Version'''		<br>Verify for each camera that was upgraded, that it shows the correct latest version under '''Firmware Version'''

	[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR7.png\|1200px]]		[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR7.png\|1200px]]