Template:LumiLuxLite Camera Firmware Upgrade Via NVR: Difference between revisions

From Luminys WIKI
← Older edit
No edit summary
No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
=LumiLuxLite Kit Camera Firmware Upgrade (Via NVR's Web Interface)=
=LumiLuxLite Kit Camera Firmware Upgrade (Via NVR's Web Interface)=
'''PLEASE NOTE:''' These instructions cannot be performed on a LumiLuxLite camera unless it is already on Firmware Version '''6.2.142.410000''' or later


==Description==
==Description==
This article will cover how to upgrade firmware on the N3T-5KA2 cameras included in the LumiLuxLite Kit, via the NVR's web interface
This article will cover how to upgrade firmware on the '''N3T-5KA2''' cameras included in the LumiLuxLite Kit, via the NVR's web interface


==Prerequisites==
==Prerequisites==
Line 14: Line 16:
|}
|}


'''PLEASE NOTE:''' <!--If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.--> If you are following these instructions to upgrade the camera via the camera's web interface, make sure the camera firmware file you are using ends with ".update". If it ends with ".bin", change it to ".update".
'''PLEASE NOTE:''' <!--If the R3 Model Kit NVR is on Firmware Build Date 6-4-2025 or older, and the LumiLuxLite Kit Cameras are on Firmware Version 6.2.138.410000 or older, make sure to upgrade the firmware of the cameras before you upgrade the firmware of the recorder, via the instructions below.--> If you are following these instructions to upgrade the camera via the NVR's web interface, make sure the camera firmware file you are using ends with ".bin". If it ends with ".update", change it to ".bin".
<br>If you want to upgrade the camera's firmware via the the NVR's interface, follow the instructions on this page:[[Here]]
<br>If you want to upgrade the camera's firmware via the the camera's interface, follow the instructions on this page: [[Kits/LumiLuxLite_Camera_Firmware_Upgrade|Here]]


==Step by Step Instructions==
==Step by Step Instructions==
1. Log into the web inteface of the NVR.
1. Log into the web inteface of the NVR.
<br>Click on '''Camera''' at the top.
<br>Click on '''Storage''' at the top.
<br>Click on '''PoE''' on the left.
<br>Click on '''Recording Mode''' on the left.
<br>Click on the '''Bridge''' option for '''Mode''' '''(This is a requirement to use bridge mode to process the update)'''
<br>Check the boxes for '''Disable''' under '''Main Stream''', '''Sub Stream1''', and '''Sub Stream2'''.
 
<br>Click on '''Apply''' at the bottom
[[File:LumiLuxLiteCameraFirmwareUpgrade1.png|1200px]]
 
2. Click on '''OK'''
 
[[File:LumiLuxLiteCameraFirmwareUpgrade2.png|500px]]


3. Click on '''Apply''' at the bottom
[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR1.png|1200px]]


[[File:LumiLuxLiteCameraFirmwareUpgrade3.png|1200px]]
2. Click on '''Camera''' at the top.
 
4. Click on '''OK'''
 
[[File:LumiLuxLiteCameraFirmwareUpgrade4.png|500px]]
 
5. You will be logged out of the NVR and it will say '''Operation succeeded''' and '''Restarting'''.
<br>The NVR will reboot
 
[[File:LumiLuxLiteCameraFirmwareUpgrade5.png|1200px]]
 
6. Once the NVR is done rebooting, log back into the web interface.
<br>Click on '''Camera''' at the top.
<br>Click on '''Camera Registration''' on the left.
<br>Click on '''Camera Registration''' on the left.
<br>Click on '''Protocol''' in the bottom Device Search section to re-order the list by the protocol of each camera
<br>Click on the '''Camera Upgrade''' tab near the top


[[File:LumiLuxLiteCameraFirmwareUpgrade6.png|1200px]]
[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR2.png|1200px]]


7. Scroll through the Device Search section on the bottom, until you find your cameras listed with the '''LumiKit''' protocol.
3. Click on '''Browse''' next to the '''File Path''' field
<br>Note the IP addresses of each camera


[[File:LumiLuxLiteCameraFirmwareUpgrade7.png|1200px]]
[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR3.png|1200px]]


8. Input one of the IP addresses of one of the cameras in your web browser to load the web interface of that camera.
4. Search your file system, then locate and select the LumiLuxLite IP Camera Firmware. '''Make sure the file name ends with ".bin".'''
<br>Enter "'''admin'''" in the '''Username''' field.
<br>You will see the name of the firmware file next to '''File Path'''.
<br>Enter "'''fghj1234'''" in the '''Password''' field.
<br>Check the box next to one or multiple N3T-5KA2 cameras in the list.
<br>Click on '''Login'''
<br>Click on '''Local Upgrade''' at the bottom


[[File:LumiLuxLiteCameraFirmwareUpgrade8.png|1200px]]
[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR4.png|1200px]]


9. Click on '''Setting''' at the top.
5. As each camera upgrades you will see the '''Status''' change from "Not Upgraded" to "Downloading".
<br>Expand '''System''' on the left.
<br>Then the '''Status''' will change to a percentage that slowly increases
<br>Click on '''System Upgrade'''.
<br>Click on the '''Import''' button


[[File:LumiLuxLiteCameraFirmwareUpgrade9.png|1200px]]
[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR5.png|1200px]]


10. Search your file system, then locate and select the LumiLuxLite IP Camera Firmware. '''Make sure the file name ends with ".update".'''
6. Once each camera is done upgrading the '''Status''' will change to "Updated"
<br>You will see the name of the firmware file next to '''Import Upgrade File''' on the camera's web interface.
<br>Click on '''Upgrade'''


[[File:LumiLuxLiteCameraFirmwareUpgrade10.png|1200px]]
[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR6.png|1200px]]


11. While the camera's firmware is upgraded it will display the following message.
7. After each camera has successfully upgraded to the latest firmware, they will reboot.
<br>When it is done upgrading, the camera will reboot, and you will be logged out of the web interface
<br>Once the cameras are all done rebooting, click on '''Refresh''' at the bottom.
<br>Verify for each camera that was upgraded, that it shows the correct latest version under '''Firmware Version'''


[[File:LumiLuxLiteCameraFirmwareUpgrade11.png|1200px]]
[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR7.png|1200px]]


12. After the camera reboots, log back into the web interface.
8. Click on '''Storage''' at the top.
<br>Click on '''Setting''' at the top.
<br>Click on '''Recording Mode''' on the left.
<br>Expand '''Information''' on the left.
<br>Check the boxes for '''Record''' under '''Main Stream'''.
<br>Click on '''Version Information'''.
<br>Optionally check the boxes for '''Record''' under '''Sub Stream1''' and '''Sub Stream2'''.
<br>Verify the '''System Version''' matches the new firmware version you just upgraded to
<br>Click on '''Apply''' at the bottom
 
[[File:LumiLuxLiteCameraFirmwareUpgrade12.png|1200px]]
 
13. Repeat Steps 8 through 12 for each camera.
 
14. Log back into the web interface of the NVR.
<br>Click on '''Camera''' at the top.
<br>Click on '''PoE''' on the left.
<br>Click on the '''Route''' option for '''Mode'''
 
[[File:LumiLuxLiteCameraFirmwareUpgrade13.png|1200px]]
 
15. Click on '''Apply''' at the bottom
 
[[File:LumiLuxLiteCameraFirmwareUpgrade14.png|1200px]]
 
16. Click on '''OK'''
 
[[File:LumiLuxLiteCameraFirmwareUpgrade4.png|500px]]
 
17. You will be logged out of the NVR and it will say '''Operation succeeded''' and '''Restarting'''.
<br>The NVR will reboot
 
[[File:LumiLuxLiteCameraFirmwareUpgrade5.png|1200px]]
 
18. Log back into the web interface of the NVR.
<br>Click on '''Camera''' at the top.
<br>Click on '''Camera Registration''' on the left.
<br>Verify that all of your cameras have re-connected to the NVR and show Green Circles under the '''Connection Status''' column


[[File:LumiLuxLiteCameraFirmwareUpgrade17.png|1200px]]
[[File:LumiLuxLiteCameraFirmwareUpgradeViaNVR8.png|1200px]]

Latest revision as of 11:29, 24 November 2025

LumiLuxLite Kit Camera Firmware Upgrade (Via NVR's Web Interface)

PLEASE NOTE: These instructions cannot be performed on a LumiLuxLite camera unless it is already on Firmware Version 6.2.142.410000 or later

Description

This article will cover how to upgrade firmware on the N3T-5KA2 cameras included in the LumiLuxLite Kit, via the NVR's web interface

Prerequisites

  • LumiLuxLite Kit: Luminys NVR, N3T-5KA2 Cameras
  • The Luminys IP Cameras Connected to the PoE Switch on the Back of the NVR
  • A Computer on the Same Network as the NVR
  • The Latest Firmware for the LumiLuxLite IP Cameras:

Download Here:


Version: 6.2.177.410000

PLEASE NOTE: If you are following these instructions to upgrade the camera via the NVR's web interface, make sure the camera firmware file you are using ends with ".bin". If it ends with ".update", change it to ".bin".
If you want to upgrade the camera's firmware via the the camera's interface, follow the instructions on this page: Here

Step by Step Instructions

1. Log into the web inteface of the NVR.
Click on Storage at the top.
Click on Recording Mode on the left.
Check the boxes for Disable under Main Stream, Sub Stream1, and Sub Stream2.
Click on Apply at the bottom

2. Click on Camera at the top.
Click on Camera Registration on the left.
Click on the Camera Upgrade tab near the top

3. Click on Browse next to the File Path field

4. Search your file system, then locate and select the LumiLuxLite IP Camera Firmware. Make sure the file name ends with ".bin".
You will see the name of the firmware file next to File Path.
Check the box next to one or multiple N3T-5KA2 cameras in the list.
Click on Local Upgrade at the bottom

5. As each camera upgrades you will see the Status change from "Not Upgraded" to "Downloading".
Then the Status will change to a percentage that slowly increases

6. Once each camera is done upgrading the Status will change to "Updated"

7. After each camera has successfully upgraded to the latest firmware, they will reboot.
Once the cameras are all done rebooting, click on Refresh at the bottom.
Verify for each camera that was upgraded, that it shows the correct latest version under Firmware Version

8. Click on Storage at the top.
Click on Recording Mode on the left.
Check the boxes for Record under Main Stream.
Optionally check the boxes for Record under Sub Stream1 and Sub Stream2.
Click on Apply at the bottom

Retrieved from "https://wiki.luminyscorp.com/index.php?title=Template:LumiLuxLite_Camera_Firmware_Upgrade_Via_NVR&oldid=53423"