|
|
| Line 1: |
Line 1: |
| ==Description== | | ==Description== |
| This tutorial will cover how to physically set up LumiGuardian. | | This tutorial will cover how to apply licenses for LumiCenter. |
|
| |
|
| ==Prerequisites== | | ==Prerequisites== |
| * All necessary tools will be provided inside the storage box. | | * Either a license key file or serial number of the license key provided by Sales Rep. |
| * A ladder
| |
|
| |
|
| ==Step by Step Instructions== | | ==Step by Step Instructions== |
|
| |
|
| 1. Unlock the support access with the attached keys and remove it from the support. | | 1. When the client first launches, a pop-up window will indicate that demo mode is active. Demo mode is valid for 30 days from the date of installation and operates daily between 8 AM and 6 PM. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 2. Pull out and hold the hook-like metal bolt and turn the support clockwise until the bolt can reach the hole on the other side and lock in place. Then release the bolt. | | 2. If a license has not been purchased yet, it is still possible to log in via demo mode by clicking "Continue." If a license has been purchased, click "Launch activation utility" to activate the license. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 3. Pull out the curved pin, then remove the metal bolt to unlock the support. | | 3. After clicking "Launch activation utility," log in again using the newly created password. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 4. Once unlocked, pull out the support and lock it again with the metal bolt and curved pin.
| | ===Activation=== |
|
| |
|
| [[File:Example.png | 400px]]
| | 4. After user authentication, two options will appear: Activate and Advanced mode. |
| | |
| 5. Store the hand crank. Then replace the yellow support access and lock it back into position with the keys.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 6. Unlock the curved pin from the tow arm and remove the metal bolt. Lift the tow arm and stabilize it in place. Once it's stabilized, re-secure it with the metal bolt and curved pin.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 7. To lift the wheel, pull and hold the metal handle out while raising the wheel. Once the wheel is lifted, release the handle to allow it to fall back into the lock mechanism.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 8. Pull down the black cover on the lockbox to reveal the keypad.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 9. Set the dials to the default key code of 0000. To unlock the lockbox, use one hand to pull down the left black handle and the other hand to pull the bottom black cover outward. Inside are the 3 keys for the storage box, electrical box, support access, and control box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 10. Unlock the storage box using the silver metal key. Pull and hold the metal handle outward with one hand, while using the other hand to lift the plastic black handle upward to open the storage box
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 11. Remove all the equipment from the storage box and verify the contents: 1 Control Box, 2 Analog Speakers, 1 Floodlight, 2 Speaker Mounts, 1 Silver Hand Crank, 1 Yellow Hand Crank, 2 Steel Cables, 1 Towing Power Connector, 1 Bag of 2 Small Silver Keys, 1 Bag or 4 Black Plastic Screw Knobs, 1 Bag of 24 Hex Screws, 1 Bag of 4 Sets of Ethernet Waterproofing Connectors
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 12. Locate and retrieve the silver hand crank.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 13. Attach the hand crank to solar panel support and rotate it clockwise to adjust the solar panel. Continue until it’s at the desired angle. Do not raise it past 50 degrees from horizontal.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 14. Press and hold down on the blue lever at the base of one side of the solar panel. Pull one of the side solar panels outward until it’s fully extended. Repeat on the other side solar panel.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 15. Locate and retrieve the control box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 16. Unscrew the O-Nut from the bolt on the base of the control box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 17. Remove the bolt from the base of the control box via the O Ring.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 18. Place the base of the Control Box on top of the Mast in whatever direction you prefer.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 19. Slide the O Ring Bolt through the holes on both sides of the control box base and mast.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 20. Secure the O Ring Bolt with the O Ring Nut.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 21. Remove the plastic covers of the power ports on the bottom of the Controller Box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 22. Connect the Black power connector, attached to the black power cable on the side of the mast, to the port with the yellow cover. Make sure it locks in place.
| |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 23. Connect the Silver power connector, attached to the black power cable on the side of the mast, to the port with the black cover. Twist the end to lock it in place.
| | Under Activate, there will be four options: |
|
| |
|
| [[File:Example.png | 400px]]
| | 5. Load license file: This option allows either dragging and dropping the license file into the white square box (UAC must be disabled) or using the "Browse" button to locate the license file on the computer. |
| | |
| 24. Unscrew the black knob screw on one of the camera mounts on the controller box.
| |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 25. Push up and then pull out the camera mounting plate to remove it from the controller box.
| | 6. Enter serial number: In this option, the serial number will be provided by a Luminys representative. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 26. Locate and retrieve the bag of Ethernet waterproofing covers.
| | 7. Activate free version of the system: This option allows moving away from demo mode, removing time restrictions on the server. However, the free version is limited to 1 server and 4 video channels. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 27. Put the plastic waterproof nut over the ethernet cable on the controller box.
| | 8. If the license file or serial number has already been used or there is an issue, an error message will be displayed, as shown in the screenshot below. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 28. Place the rubber waterproof apron over the ethernet cable and slide it into the plastic waterproof nut.
| | 9. Create an activation request: This option allows creating the request file through three methods. The simplest method is the first method that generates an encrypted text file. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 29. Put the plastic waterproof connector over the ethernet cable. Then slide it into the plastic waterproof nut and twist it to lock it in place.
| | 10. Under Advanced Mode, there are two options: Change domain name and Exclude from domain. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 30. Put the rubber O ring over the ethernet cable and slide it into the plastic waterproof connector.
| | 11. Change domain name: This option allows entering a custom domain name or using the same name as another LumiCenter server. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 31. Take the camera’s pigtail and side it through the opening in the mounting plate.
| | 12. Once the domain name is changed, it will be displayed in the screenshot below after logging in. The domain can also be changed again later, where it shows in the red highlighted red square box. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 32. Locate and retrieve the bag of hex screws.
| | 13. Exclude from domain: Exclude server from domain to allow adding to another domain. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 33. Put a screw through the hole on the camera’s mount and then through the mounting plate. Screw the hex screw in place. Repeat on the 3 other holes on the camera’s mount and the mounting plate.
| | 14. Warning: Excluding from the domain will remove all settings configured on the server, so be sure to carefully read the pop-up window before proceeding! |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 34. Connect the end of the ethernet cable on the control box to the port on the pigtail of the camera. Then push the waterproof connector over the port and twist it to lock it in place.
| | 15. The Deactivate option is available only after a license has been applied or when using the free version. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 35. Slide the mounting plate back onto the control box and screw the black knob screw back on to secure it.
| | 16. Before removing the license, LumiCenter will prompt to save the license file (license.key). Using the first option, the license file can be saved to the computer, for example, on the desktop. |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 36. Repeat the process for up to 3 other cameras.
| | 17. Click the first option again, and a new pop-up window will appear, allowing for the license to be removed. Click "Yes" to confirm the removal of the license. |
| | |
| 37. Locate and retrieve one of the analog speakers, one of the speaker mounting plates, and the bag of hex screws.
| |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
|
| |
|
| 38. Put 3 hex screws through the holes on the speaker’s angle arm and then through the mounting plate. Screw all 3 screws until they are secure.
| | 18. A success message will be displayed once the license removal process is complete. |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 39. Unscrew the black knob screw on one of the speaker mounts on the controller box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 40. Place the speaker mount on the controller box and screw the black knob screw back on to secure it.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 41. Remove the covers on the audio and power connectors on the controller box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 42. Plug the audio input cable of the speaker into the audio output port on the controller box. Plug the power cable on the speaker into the power connector on the controller box.<br>
| |
| <span style=color:red;font-style:italic;font-weight:bold>Note: Ensure all connections are applied with waterproof electrical tape.</span>
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 43. Repeat the process for the other speaker.
| |
| | |
| 44. Unscrew the black knob screw on the flood light mount on the controller box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 45. Locate and retrieve the pre-mounted floodlight.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 46. Place the floodlight on the controller box. Then screw the black knob screw back onto the controller box to secure the floodlight. Remove the cover on the power connector on the controller box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 47. Plug the power cable on the floodlight into the power connector on the controller box.<br>
| |
| <span style=color:red;font-style:italic;font-weight:bold>Note: Ensure all connections are applied with waterproof electrical tape.</span>
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 48. Locate and retrieve the steel cables.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 49. Unspool the steel cables. Then connect the single carabiner on one end of one of the cables to one of the supports on the side of the LumiGuardian trailer nearest to the control box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 50. Connect one of the two carabiners on the other end of the steel cable to the carabiner on the mast closest to the support, and the other carabiner to the bottom of the control box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 51. Repeat this process for the other support on the other side of the control box.
| |
| | |
| 52. Locate and retrieve the yellow crank handle.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 53. Remove the wingnut and nut from the yellow crank connector on the mast.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 54. Place the yellow crank handle on the crank connector on the mast, ensuring it fits properly on the silver metal connector. Place the nut over it and then the wingnut. Tighten the wingnut to secure the crank handle.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 55. Crank the yellow hand crank clockwise to raise the mast. Stop when the red line appears on the mast. Do not crank past that point.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 56. Use the small silver key from the lockbox to unlock the electrical box. Pull and hold the metal handle outward with one hand, while using the other hand to lift the plastic black handle upward to open the electrical box. Then locate the power switches.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 57. Set the Power Mode via the Power Switches:
| |
| * To set to Normal Mode (Charging via the Solar Panels and running power to the Controller Box), turn on switches QF1, QF2, and QF3; keep QF4 in the off position.
| |
| * To set to Charging Mode (Charging the battery via the Solar Panels, with the Controller Box off), turn on switches QF1, QF2, and QF4; keep QF3 in the off position.
| |
| <span style=color:red;font-style:italic;font-weight:bold>Note: Make sure to turn the switches on in order from left to right. Also, do not constantly turn the switches on and off; it could cause damage to the circuit breakers.</span>
| |
| | |
| Close the cover to the electrical box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 58. Setup is complete.
| |
| | |
| ===Optional: Charging Mode via Power Cable===
| |
| <span style=color:red;font-style:italic;font-weight:bold>Note: Charging via power cable should only be performed if there is little to no light available to charge via the solar panels. LumiGuardian will prioritize charging via only one power source (Solar Panel or Power Cable) based on whichever is inputting more wattage into the system. When there is enough light available, LumiGuardian will charge faster via solar panel.</span>
| |
| | |
| 1. Using a C13 power cable (not included) you can charge the LumiGuardian trailer via power from a wall plug.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 2. Open the cover on the power port on the side of the electrical box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 3. Connect the power cable to the power port and then plug it into a wall socket or surge protector.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 4. Use the small silver key from the lockbox to unlock the electrical box. Pull on the handle to open the electrical box. Then locate the power supply box.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 5. Turn the AC Input switch to the On position.
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 6. Locate the power switches
| |
| | |
| [[File:Example.png | 400px]]
| |
| | |
| 7. Turn on switches QF1, QF2, and QF4; keep QF3 in the off position.
| |
| | |
| <span style=color:red;font-style:italic;font-weight:bold>Note: Make sure to turn the switches on in order from left to right. Also, do not constantly turn the switches on and off; it could cause damage to the circuit breakers.</span>
| |
| | |
| Close the cover to the electrical box.
| |
|
| |
|
| [[File:Example.png | 400px]] | | [[File:Example.png | 400px]] |
Description
This tutorial will cover how to apply licenses for LumiCenter.
Prerequisites
- Either a license key file or serial number of the license key provided by Sales Rep.
Step by Step Instructions
1. When the client first launches, a pop-up window will indicate that demo mode is active. Demo mode is valid for 30 days from the date of installation and operates daily between 8 AM and 6 PM.
File:Example.png
2. If a license has not been purchased yet, it is still possible to log in via demo mode by clicking "Continue." If a license has been purchased, click "Launch activation utility" to activate the license.
File:Example.png
3. After clicking "Launch activation utility," log in again using the newly created password.
File:Example.png
Activation
4. After user authentication, two options will appear: Activate and Advanced mode.
File:Example.png
Under Activate, there will be four options:
5. Load license file: This option allows either dragging and dropping the license file into the white square box (UAC must be disabled) or using the "Browse" button to locate the license file on the computer.
File:Example.png
6. Enter serial number: In this option, the serial number will be provided by a Luminys representative.
File:Example.png
7. Activate free version of the system: This option allows moving away from demo mode, removing time restrictions on the server. However, the free version is limited to 1 server and 4 video channels.
File:Example.png
8. If the license file or serial number has already been used or there is an issue, an error message will be displayed, as shown in the screenshot below.
File:Example.png
9. Create an activation request: This option allows creating the request file through three methods. The simplest method is the first method that generates an encrypted text file.
File:Example.png
10. Under Advanced Mode, there are two options: Change domain name and Exclude from domain.
File:Example.png
11. Change domain name: This option allows entering a custom domain name or using the same name as another LumiCenter server.
File:Example.png
12. Once the domain name is changed, it will be displayed in the screenshot below after logging in. The domain can also be changed again later, where it shows in the red highlighted red square box.
File:Example.png
13. Exclude from domain: Exclude server from domain to allow adding to another domain.
File:Example.png
14. Warning: Excluding from the domain will remove all settings configured on the server, so be sure to carefully read the pop-up window before proceeding!
File:Example.png
15. The Deactivate option is available only after a license has been applied or when using the free version.
File:Example.png
16. Before removing the license, LumiCenter will prompt to save the license file (license.key). Using the first option, the license file can be saved to the computer, for example, on the desktop.
File:Example.png
17. Click the first option again, and a new pop-up window will appear, allowing for the license to be removed. Click "Yes" to confirm the removal of the license.
File:Example.png
18. A success message will be displayed once the license removal process is complete.
File:Example.png
