|
|
| Line 1: |
Line 1: |
| <div class="lm-banner">[[File:LuminysMainPageBanner2.png]]</div>
| | Created by mistake, needs to be deleted. |
| | |
| = <div class="center">Configuration via WebGUI</div> =
| |
| | |
| ===Description===
| |
| This tutorial will go over the configurations of network switches via webGUI
| |
| | |
| ===Prerequisites===
| |
| * Network switch powered on and is connected to the network.
| |
| | |
| ===Video Instructions===
| |
| <!--<embedvideo service="youtube">Under Construction</embedvideo>-->
| |
| N/A
| |
| | |
| ===Step by Step Instructions===
| |
| | |
| 1. Front view of the device: connect the power and Ethernet cables. The LED indicator on the right side of the switch will illuminate, indicating a successful power connection.
| |
| | |
| [[File:NetworkSwitch1.jpg|400px]]
| |
| | |
| 2. Connect the switch to the dedicated network. The switch should automatically obtain a DHCP IP address. If it does not, enter the default IP address: 192.168.1.100 to access the initialization screen. Ensure the computer is on the same subnet as the switch for proper access.
| |
| | |
| [[File:NetworkSwitch2.png|400px]]
| |
| | |
| 3. Set a password and finish the initialization process.
| |
| | |
| [[File:NetworkSwitch3.png|400px]]
| |
| | |
| 4. After logging in, the main screen will display the status of the ports and their usage.
| |
| | |
| [[File:NetworkSwitch4.png|400px]]
| |
| | |
| 5. To change the IP from DHCP to Static, go to “Maintenance” > “Network.” Set the DHCP dropdown to “Off,” then manually enter the static IP address, Subnet Mask, Default Gateway, and DNS. Click “Save” to complete the process.
| |
| | |
| [[File:NetworkSwitch5.png|400px]]
| |
| | |
| 6. Turn specific ports on or off to power cycle any device connected to a PoE port.
| |
| | |
| [[File:NetworkSwitch6.png|400px]]
| |
| | |
| 7. To access device information, navigate to “Maintenance” > “Device Info.”
| |
| | |
| [[File:NetworkSwitch7.png|400px]]
| |
| | |
| 8. To change the password, select “Maintenance” > “Change Password.”
| |
| | |
| [[File:NetworkSwitch8.png|400px]]
| |
| | |
| 9. To update the firmware and restore factory defaults, select “Maintenance” > “Firmware Config.”
| |
| | |
| [[File:NetworkSwitch9.png|400px]]
| |
Created by mistake, needs to be deleted.
