Access Control/Wiring of the Reader and Controller

From Luminys WIKI
Revision as of 16:00, 14 November 2024 by Techsupport (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Wiring of the Reader and Controller

Description

This tutorial will go over how to wire reader to access control.

Prerequisites

  • Access control and readers

Video Instructions

Coming soon

Step by Step Instructions

1. In the following wiring example, two readers are connected via RS485 to access control.

2. Match the wires of the reader and connect them to the corresponding contacts of the access control.
Purple = 485A
Yellow = 485B
Brown = LED1
Blue = CASE
Black = GND
Red = 12V

Note: For third-party readers, Wiegand connections are supported.

Retrieved from "https://wiki.luminyscorp.com/index.php?title=Access_Control/Wiring_of_the_Reader_and_Controller&oldid=1061"