LumiGuardian/How to access WebGUI

LumiGuardian How to access WebGUI

Description

This article will cover how to access WebGUI for LumiGuardian devices.

Prerequisites

• A computer with internet access and Lumiviewer installed
• A LumiGuardian up and running with data licenses.

Step-by-step Instruction

1. Open LumiViewer on PC, click on Device Manager

2. In the newly opened window, click Add.

3. A window will slide out from the right. Change the "Method to add:" to "SN" (1).
After that, enter all the required information:

Device Name: You can name it anything you prefer. It is recommended to use the same name as in LumiCloud.
SN: Use the same SN that you used to add the device to LumiCloud. You can also find this SN on the plate of the trailer or on a sticker inside the top control box.
Username: should always be "admin"
Password: this is the password you setup for admin.
Protocol: Keep this as "Private"

After that click "Add and Continue" or "Add" (2)

4. Wait until the status displays as Online (1), then click the gear icon under Operation.(2)