Video doorbell/Initial Setup Instructions: Difference between revisions
Techsupport (talk | contribs) |
Techsupport (talk | contribs) |
||
| Line 51: | Line 51: | ||
10. Assign a name to the doorbell, then tap “Next” to continue. | 10. Assign a name to the doorbell, then tap “Next” to continue. | ||
[[File:Vdb_config_10.jpg|256px|https://wiki.luminyscorp.com/images/ | [[File:Vdb_config_10.jpg|256px|https://wiki.luminyscorp.com/images/0/03/Vdb_config_10.jpg]] | ||
Revision as of 16:43, 8 June 2026
Description
This guide provides instructions for configuring your video doorbell for first-time use.
Prerequisites
- Installation instruction
- Register an account in LumiViewer
- Power on the doorbell and wait for the blue LED indicator to begin flashing.
- Download and open LumiViewer app
Step by Step Instructions
1. Tap the "+" icon in the top-right corner of the app, then select “SN/Scan.”
2. Scan the QR code on the product’s serial number (SN). Alternatively, tap the “Manual” button in the top-right corner to enter the SN manually.
3. If you scanned the QR code in the previous step, tap “Next” to continue. If you selected “Manual,” enter the serial number (SN) and then tap “Next” to proceed.
4. Follow the on-screen instructions, then tap “Next” to continue.
5. At this step, the following screen will appear. Please wait and keep your phone close to the doorbell.
6. Create a password for the doorbell. Providing an email address is optional. Tap "Next" to continue
7. Ensure your phone’s Wi‑Fi is enabled, then tap “Next” to continue.
8. Enter your Wi‑Fi password, then tap “Next” to continue.
9. On this screen, wait without moving your phone too far away from the doorbell. This process may take several minutes to complete.
10. Assign a name to the doorbell, then tap “Next” to continue.
