Access Control/Initialization C-4MA

☰ Navigation Menu ▾

• How-To Guides ▾
  • Cameras ▸
    • IPC
    • LumiLuxLite
    • PTZ
    • Specialty
    • Direct-to-Cloud
    • Analog
  • Recorders ▸
    • NVR
    • DVR
  • IP Speaker
  • Access Control ▸
    • C-2PA
    • C-4MA
    • Video Doorbell
    • Facial Recognition Terminal
  • LumiCloud ▸
    • Basic Use
    • Recorders
    • Direct-to-Cloud Cameras
    • Access Control
    • Network Switches
  • Networking ▸
    • Access Point
    • Network Switches
    • Coax Extender
  • Off Grid ▸
    • LumiGuardian
    • LumiWatch
  • Software & Apps▸
    • Computer Software ▸
      • LumiCenter
      • LumiPlayer
      • LumiUtility
      • LumiViewer
    • Mobile Software ▸
      • LumiCloud
      • LumiPartner
      • LumiViewer
  • 3rd Party Integration

• How-To Videos ▾
  • Cameras ▸
    • IPC
    • PTZ
  • Recorders ▸
    • NVR
  • Access Control
  • Off Grid ▸
    • LumiGuardian
  • LumiCloud ▸
    • LumiCloud Portals
    • LumiCloud for Network Switches
  • Software ▸
    • LumiCenter

• Firmware & Data Sheets ▾
  • Cameras ▸
    • IPC
    • PTZ
    • Specialty
    • Direct-to-Cloud
    • Analog
  • Recorders ▸
    • NVR
    • DVR
  • Kits
  • IP Speaker
  • Access Control
  • Networking
  • Off-Grid ▸
    • LumiGuardian
    • LumiWatch

• Software Downloads ▾
  • Computer Software ▸
    • LumiCenter
    • LumiPlayer
    • LumiUtility
    • LumiViewer
  • Mobile Software ▸
    • LumiCloud
    • LumiPartner
    • LumiViewer

• Product Selector ▾
  • IP Cameras
  • HD Analog
  • NVR
  • DVR
  • Accessories

Contact Support

Access Control Initialization and Basic Setup

Description

This tutorial will go over how to initialize access control and some basic setup.

Prerequisites

• Access control powered and connected on local network.
• LumiUtility Installed

Step by Step Instructions

1. Open LumiUtility and locate the local IP address of the access controller. In the example below, the IP address is 192.168.2.49.