Access Control/Wiring of the Reader and Controller C-4MA
From Luminys WIKI
☰ Navigation Menu ▾
Wiring of the Reader and Controller
Description
This tutorial will go over how to wire reader to access control.
Prerequisites
- Access control and readers
Video Instructions
Coming soon
Step by Step Instructions
1. In the following wiring example, a reader is connected via RS485 to access control.
2. Match the wires of the reader and connect them to the corresponding contacts of the access control.
Purple = 485A
Yellow = 485B
Brown = LED1
Blue = CASE
Black = GND
Red = 12V
Note: For third-party readers, Wiegand connections are supported.
